Homemade Magnetic Energy – Easy to Follow Instructions

Sunday, September 5th, 2010 at 6:13 pm

Just a short decade ago, the only information that was available on alternative energy generation was difficult to locate and even more difficult to understand. Over the last few years, the internet has allowed a large amount of information to become freely available that there is no longer any excuse to not take responsibility for your own power needs.

The popularity of solar and wind generation systems has overwhelmed the alternative energy forums and websites and anyone with just a rudimentary knowledge of diy is now able to harness energy from both the sun and the wind. These systems however, have the disadvantage of only being viable for people who live in areas that get an abundance of sun or wind in order to generate that energy. For those people living in areas that experience limited sun and wind there is an alternative that is growing in popularity by the day.

Magnetic energy generators, until recently were considered to be in the realm of science fiction, but this technology has been around for many decades and is now as easy to manufacture in your backyard or garage even without any previous technical experience. There are a collection of excellent diy manuals available online that offer comprehensive step by step instructions. Many of these manuals are written with a complete novice in mind.

In addition to the easy to follow instructions, some of the better systems offer complete component lists, lifetime updates and most importantly technical support, should you happen to find yourself having any trouble during your construction.

While the construction of solar panels and wind turbines promise to deliver up to 80% of your power needs, the magnetic energy generators will generate a mere 20% – 30% of a standard home, but the cost of constructing one of these devices will be no more then one hundred dollars and multiple devices can be constructed to up your personal power generation.

It is also extremely easy to integrate these systems into the grid system enabling you to turn your meter back and feeding any additional power back into the grid. With enough magnetic power generators, you could eventually earn money from these devices by selling your excess power back to the power companies.

For anyone looking for a way to save money as well as becoming more self-reliant, this is an ideal system that will generate power endlessly. An excellent investment for your future.

For free alternative energy information check out our Advice and Resource Site at

Technorati Tags: , , , , ,

admin homemade wind generator , , , , , Comments (0)

How to Build a Wind Turbine for $100 – Easy to Follow Plans

Saturday, March 6th, 2010 at 11:50 pm

www.residential-wind-power.com Hi Guys – It’s Barry from www.residential-wind-power.com here. I have rresidential wind turbinesof residential wind turbines over the last few years – some are great and some are just terrible. In my position you get to see all types. I can honestly say that the wind turbine plans i am showing you now are the best that i have seen. I have also had some great feedback from my readers at www.residential-wind-power.com and they have given this plan glowing reviews. Do yourself a favour and check out these easy to follow plans on how to build a wind turbine for $100. It is so easy you’ll kick yourself wondering why you didn’t do it sooner.

Technorati Tags: , , , , , ,

admin residential wind turbines , , , , , , Comments (0)

Home Made Wind Turbine – Follow These Simple Steps to Make a Wind Turbine

Friday, March 5th, 2010 at 12:17 am

Yes, wind will make environmentally friendly electricity, but a home made wind turbine will not work everywhere. But if you have a steady enough wind speed you could make a wind turbine to generate enough electricity to lower you energy bills. Making a home wind turbine can be a fun weekend project that won’t take long to create, with the right plan and instructions that is.

Here is why you should build your very own home made wind turbine:

Here are the top two benefits to making a home made wind turbine; saving money on bills and help save the environment. But wait that is not all, below you will find the most important benefit to making your own wind turbine at home:

Building your own home made wind turbine has to a great benefit over ordering a wind power system. The real problem with doing this is that you will have to spend up to $1000 dollars and even up to $10,000 dollars probably even more too. By spending anywhere from $1000 to $10000 dollars it could take year before it actually pays for itself. So that is why you would want to create your own wind turbine, you will save a lot of money plus it will cost a fraction of purchasing a wind power unit.

Here are some basic steps that you could use to create a home made wind turbine system:

1. Take the propellers off the flower. With the propeller of, it will be used to spin the axle. Use a propeller from a larger pinwheel floor will work the best.

2. Put the spools between the plastic sheets and then glue them on. Then you have to place the small spools at the corners of the plastic sheet. Super glue will work the best here, once super glued let it dry. This will serve as the casing for the wind turbine generator.

3. be sure to measure the metal rod before you drill holes into the plastic. The hole that you drilled will be just for the metal rod. Be sure that the holes are perfectly aligned on both sides of the sheet. When you get the hole in perfectly aligned you can then place the metal rod through them.

4. Put the magnets in the casing. Here is something that is very important; you have to have enough room for them to rotate freely around the axle that is spinning the magnets, if you do not do this it will not work. Attach the magnets together with spacers. If you see that you don’t have enough room between the spacers to insert the axle, then the magnet will not work to generate electric current when the axle spins.

5. Then put the rod into the hole, after you have done that wrap wire around the generator. This is important part; wrap the wire around the casing about 225 to 300 times.

6. After you have done that, attach the propeller to the axle. Make sure that the propellers are large enough to catch the wind. Then you have to place the propeller on a metal rod, use super glue again to attach them together.

7. Remove the insulation from the wire. Then after you have done that, attach the lead to the end of a low voltage and amperage light bulb.

8. Once you have this finished, place the wind turbine that you just built in the breeze of the wind. You are doing this to see if it will provide enough power to light the bulb. But if there is not enough wind speed the make the wind turbine spin, and then just turn the propellers manually to see if it works.

By just following these simple steps you will be well on your way to making your very own wind turbine. By making your own wind turbine that will make power for you house and more. Go here to learn more about making
homemade wind turbines
visit this great this –> http://projecthomenergy.com

Technorati Tags: , , , , , , ,

admin home made wind mill , , , , , , , Comments (0)

Powered by Yahoo! Answers